Ploughs
lakeman
Join Date: Jul 2003 Posts: 39 Rollag Minnesota |
2003-07-14 59477
I am looking at picking up a used 2 bottom plough. I know very little about them. What should I look for. I spoke to a dealer and a new one with couliers? cost 1200 dollars. What are coultiers? Aren't all ploughs created equal?
Reply to | Quote Reply | Add Photo
Ploughs
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2003-07-14 59485
There are differences. Some old ones you might not even be able to get the wearing parts for. Some have a break-a-way on the bottom so they don't break the bottom. Some have auto reset, some don't. ....
Reply to | Quote Reply | Add Photo
Ploughs
ahannay
Join Date: Jul 2003 Posts: 1 comfort, texas |
2003-09-08 63414
Coulters are the sharp, flat disks that precede the plow share. eir job is to cut through the trash in the field so the shear can get a better grip. They can be raised and lowered depending on what they must cut through. They are nice to have on a plow, but with just a little trash in a field, the plow will work without them.
What you really need to look for is a plow with good, newish shares. These bolt on the plow, and come in iron or steel. Most of the used plows you see need new ones, as they're worn down or busted off by rocks. You can order new ones, depending on the make of plow you buy. I have a Ford 2 bottom and ordered a new pair of shares -- $70 a piece. The difference was amazing. A proper new pair of shares gets sucked down deep, and the furrow rolls over nice.
By the way, don't get a new 2 bottom from places like TSC. They're not really designed to do real work. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This